D11-300P1A adapter 200-240V 50-60Hz 3A 300w

Rated: , 0 Comments
Total hits: 62
Posted on: 12/30/21

Buy New Replacement D11-300P1A adapter, Power Cord included. Works for HP pro 3330 3340 3380 3085 power supply and many more. Warranty & Fast Shipping. We are the real manufacturer for HP D11-300P1A adapter ,and we believe that our products are your best choose.

  • Brand : HP
  • Alternate with the following models : D11-300P1A
  • Cell technology : GSB428
  • Capacity : 200-240V 50-60Hz 3A
  • Voltage : 300w
  • Encoding : HPQ17382_1_Se

Online Store:

Maintenance and instructions for the HP D11-300P1A adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

You may also want to see this battery


There are still no comments posted ...
Rate and post your comment



forgotten password?